All Posts
Written by Jason Dettmar
In the event of a fault current, milliohms can make the difference between a lineman going home for...
Written by Hubbell Power Systems
In Alaska, the 115-kV Quartz Creek transmission line connects two hydroelectric dams on the Kenai...
Written by Ryan Freeman
All Hubbell Power Systems surge arresters are factory tested according to IEEE C62.11 and IEC...
Written by Hubbell Power Systems
Introduction The Versa-Tech® I and Versa-Tech® LT reclosers use a 2.4GHz remote radio to...
Written by Tim Staelens
Historical Analysis During the early development of the screw anchor, the load resistance of an...
Written by Billy Webber
When overhead electrical line workers employ proper personal protective grounding practices they...
Written by Todd Neville
It can be a challenge to identify the right elbow for varying applications. There are so many...
Written by Todd Neville
Elbow and parkingstand arresters are provided with a ground wire as well as a grounding eye for...
Written by Brian Dob
Pilot Protection Relaying uses a communications channel (pilot channel) to provide coordination...
Written by Hubbell Power Systems
THE IMPORTANCE OF EQUIPMENT REPOSITIONING In recent years, the U.S. has been faced with several...
Written by Hubbell Power Systems
Ensure cutback dimensions are accurate and all cuts are square. Do not nick or cut the shield,...
Written by Robert Ransone
When designing a high voltage transmission line utilizing toughened glass bell insulators,...
Written by Todd Neville
Follow all safe work practices and recommended work procedures. Review instruction sheet. Form...
Written by Haley Engel
Surge arresters can extend the life of system assets by limiting the voltage across expensive...